| Customization: | Available |
|---|---|
| Brand Name: | Mateksys |
| Model Number: | Fchub-12s |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Matek Mateksys FCHUB-12S V2 Hub Power Distribution Board PDB 5V & 12V BEC Built-in 184A Current Sensor For RC Multicopter
PDB
* Input voltage range: 8~60V (3~12S LiPo)
* 4x70A cont, 4x110A burst
* 4x ESC power /signal/ telemetry pads
* Current Senor: 440A, 3.3V ADC, Scale 75
* 2x LED indicators for 5V, 12V
* 1K:20K voltage divider built-in
JST-SH 8pin connector
* "V" pad: 12V or VBat voltage selectable
* G: GND
* Curr: current sensor signal
* TLM: for BlHeli32 ESC telemetry
* S1~S4: ESC signal
BEC 5V output (5V pad)
* Voltage: 5.1 +/- 0.1VDC
* Continuous current 5 Amps, Max.6A
* Short-circuit tolerant (2 seconds)
* Overcurrent protection & self-recovery
BEC 12V output (12V pad)
* Voltage: 12.0 +/- 0.2VDC (Input voltage >=12V)
* Continuous current 4 Amps, Max.5A
* Input voltage<12V, Output voltage = Input voltage
* Short-circuit tolerant (2 seconds)
* Overcurrent protection & self-recovery
Switchable 12V output (12VSW pad)
* 12V ON/OFF switchable via PINIO(high/low level)
* support constant 2A
* can be use for powering VTX,LED etc.
BEC 3.3V output
* Linear Regulator
* Continuous current: 500mA
Physical
* Mounting: 30.5 x 30.5mm, Φ3mm
* Dimensions: 55 x 50 x 6 mm
* Weight: 21g
Including
* 1x FCHUB-12S V2
* 1x SH1.0_8pin cable 5cm, 2x SH1.0_8pin connectors
){kind=link}