Matek Hcs-150A Hall Current Sensor 150A Sensor for H743 Slim V3 Flight Controller RC Multirotor DIY Parts Fpv Accessories

• Customization: Available
• Brand Name: Matek
• Model Number: Hcs-150A
• Product Name: Matek Hall Current Sensor 150A
• Continuous Current Rating: 0~150A DC
• Sensitivity: 20mv/a, Inav/Bf Scale = 200, Ardupilot Batt_AMP_PE
• Vbat Voltage Sense: 0~69V, Inav Scale = 2100
• Power Consumption: 17mA
• Voltage Offset Error at Zero Current: +-10mv
• Current Output Voltage Error: 5%
• Operating Temperatures: -30~80 °c
• Transport Package: Carton Packing
• Trademark: MATEK
• Origin: China

Product Description

Product Description

 

MATEK HCS-150A Hall Current Sensor 150A Sensor for H743 Slim V3 Flight Controller RC Multirotor DIY Parts FPV Accessories

Specifications
Hall effect current sensor
No voltage drop and heat on current sensor components
Offset and Sensitivity are calibrated in factory
Continuous current rating: 0~150A DC
Sensitivity: 20mV/A, INAV/BF scale = 200, ArduPilot BATT_AMP_PERVLT = 50
VBAT voltage sense: 0~69V, INAV scale = 2100, BF scale = 210, ArduPilot BATT_VOLT_MULT = 21.0
Power Consumption: 17mA
Voltage offset error at zero current : +-10mV
Curr output voltage error: 5%
Operating Temperatures: -30~80 °C
23 * 20* 23mm, 7g
step file HCS-150A_step.zip

Soldering pads
Vbat: for voltage sense, support 0~69V IN
Volt: = 1/21 Vbat, 0~3.3V out
Curr: Current signal, 0~3.3V out
5V: power supply for HCS-150A board, support 4~13V IN, 17mA
G: GND
TX/RX: for firmware update and configure (to be supported)

Tips
mount Hall sensor far from iron and magnetic material