Original Dle111 Dle 111cc Twin Cylinder 2-Stroke Gasoline/Petrol Engine Plastic Material with Side Exhaust for RC Airplane

• Customization: Available
• Private Mold: No
• Type: Gasoline Engine
• Model NO.: DLE111 DLE 111CC Twin Cylinder
• Brand Name: Dle
• Model Number: Dle 111cc
• Application: Uav Drone
• Material: Metal
• Keyword: Fpv-Drone Gasoline Engine
• MOQ: 2PCS
• Static Thrust: 25.5kg/100 Meters Altitude
• Recommended Propeller: 27X10 ; 26X12 ; 28X12 ; 28X10
• Practical Speed Range: 1400 Rmp/Min
• Maximum Power: 11.2HP/7500rpm
• Payment: Trade Assurance Tt \ Tt \ Transferwise
• Transport Package: Carton Package
• Specification: 25X20X10 cm
• Trademark: DLE
• Origin: Hubei, China
• Production Capacity: 3000 Pieces/Year

Product Description

Product Description

Parameters
type	gasoline engine	brand name	DLE
model number	DLE 111CC	Product name	gasoline engine
Application	UAV Drone	Keyword	Fpv-drone gasoline engine
MOQ	2 PCS	Static Thrust	25.5kg/100 meters Altitude
Recommended Propeller	27x10 ; 26x12 ; 28x12 ; 28x10	Practical speed range	1400 rmp/min
Maximum power	11.2HP/7500rpm	PAYMENT	Trade Assurance TT \ TT \ Transferwise

Features 

Lubricants - Can I use synthetic oil instead of mineral oil? 

It is strongly recommended used synthetic lubricant oil, especially full-Synthetic Oil, Synthetic oil will improve the engine
performance and can prevent carbon accumulation in the piston. For break in we recommend Red Line Racing Oil at 30:1 or Castrol TTS at 30:1. After 2 hours of running you can reduce the oil content to 40:1 with full synthetic high performance oils.

First Run-All DLE engines key components such as ignition, carburetor, etc have been tested before being delivered from the factory. The factory doesn't start the engine. Prior to first run we strongly recommend you inspect the engine. If you find any defect please contact use for assistance.

Ignition - There are 3 wires with 2 x black and 1 x red connectors exiting the ignition. What are the purpose of these connectors?

* the red plug connects to an ignition switch or IBEC.
* the plug with black coveing connects to the magneic sensor.
* the third is a tachometer output from the igniton unit. This telemetry wire can be connected to the Advanced Radio IET01
Telemetry unit or the DLE RPM display.

What voltage can I use for the ignition system? The ignition system will operate from 4.8v to 8.4v (Maximum 9.0v). It can be connected through an ignition switch to a 2S Lion, Lipo or LiFe battery. 

Can I use an Ignition battery elimination ciruit with the DL Ignition systems? yes you can use battery elimination circuits (IBEC) like
* Advanced Radio IET01 battery elimination ignition switch (with downlink telemetry for RPM and temperature readings for up to 7 cylinders)

Features 

* Advanced Radio IBEC01 battery elimination ignition switch 
* Tech Aero IBEC battery elimination ignition switch.
Fuel Connection - Some of the DL Engines have carburettors with 2 fuel connections. 

Which of the two connectors connects to the fuel tank?
The black nipple is fuel inlet. Connect this nipple to the fuel supply.
The brass nozzle is an air inlet used to balance the air pressure internl to the carburettor.

Warranty Information - All the DLE engines enjoy one year parts and labour warranty when used with specificed propellers, correct
lubricants and lubricant ratios. Your new DL engine number will be recorded for warranty purposes.
PLEASE NOTE: The following uses may/will damage the engine and are not covered by warranty.
* Running a DL Engine without oil or too little oil. We recommend 30:1 full synthetic for break in and 40:1 for normal running 
* Running the engine with incorrect sized propeller.
* Oversized propellers can increase stress on internal components and give poorer torque performance.
* Undersized propellers may cause too high RPM.
* Running the engine without adequate cooling may cause overheat damage. Please ensure the engine has adequate ducting to force
air over the cylinder cooling fins with a 1:3 Inlet to outlet ratio recommended with venturi fins on the air outlet to draw air.
Simply mounting an engine in the engine cowl without proper ducting is considered inadequate cooling.

Company Profile

Packaging & Shipping

FAQ

Frequently Asked Questions 

Q1: What is the Minimum Order Quantity(MOQ)? 
A1: No quantity limited, Sample order or small order is acceptable, but the customers have to pay the sample cost and the courier
cost. 

Q2: What is the lead time?(How long will it take to prepare my goods?) 
A2:2-3days for sample orders, 10-15 days for bulk orders.(The exact time will be based on the requirements) 

Q3: How will you deliver my goods to me? 
A3: Normally, we will ship the goods by air, by sea and by express. 

Q4: Can you print my own logo on the products?
A4: Yes, of course. Not only the logo, but also the packing design and other OEM services are available. 

Q5: What is your product quality? 
A5: Our raw materials are all purchased from qualified suppliers. And we have very strict QC standard to assure our final products meet your requirements. 

Q6. Do you test all your goods before delivery? 
A6: Yes, we have 100% test before delivery. 

Q7:What is your warranty? 
A7: Our warranty is 12 months after you received the goods. We will pay high attention to after-sales service.

Q8:What can I buy from you?
A8: Our products include agriculture drones,motors,battery,other drones's parts and so on