Holybro Pixhawk 6X Flight Control Kit Pix6X Drone Flight Control
|
Still deciding? Get samples of $ !
Request Sample
|
Product Details
| Customization: | Available |
|---|---|
| Fmu Processor: | Stm32h753 |
| Io Processor: | Stm32f100 |
Manufacturer/Factory & Trading Company
360° Virtual Tour
Diamond Member Since 2025
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Importers and Exporters
Years of Export Experience
Experienced Team
High Repeat Buyers Choice
The supplier has import and export rights
The export experience of the supplier is more than 10 years
The supplier has 13 foreign trading staff(s) and 7 staff(s) with over 6 years of overseas trading experience
More than 50% of buyers repeatedly choose the supplier
Sign In to see all verified strength labels (29)
Find Similar Products
Basic Info.
- Model NO.
- Pixhawk 6X (REV8) Standard Set+M9N GPS
- Mag
- Bmm150
- Accel/Gyro(Rev 3/4, Discontinued)
- Icm-20649 or BMI088
- Barometer
- Icp20100 & BMP388
- Accel/Gyro
- 3X Icm-45686
- Max Input Voltage
- 6V
- USB Power Input
- 4.75~5.25V
- Servo Rail Input
- 0~36V
- Flight Controller Dimension
- 38.8 X 31.8 X 14.6mm
- Standard Baseboard Dimension
- 52.4 X 103.4 X 16.7mm
- Mini Baseboard
- 43.4 X 72.8 X 14.2 mm
- Transport Package
- Carton Package
- Trademark
- Holybro
- Origin
- Guangdong, China
- Production Capacity
- 5000 Pieces/Year
Product Description
Product Description
Key Design Points
High-performance STM32H753 ProcessorModular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk Autopilot Bus connector.
Redundancy: 3x IMU sensors & 2x Barometer sensors on separate buses
Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control
Newly designed vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
Ethernet interface for high-speed mission computer integration
IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
Processors & Sensors
FMU Processor: STM32H753
32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
IO Processor: STM32F100
IO Processor: STM32F100
32 Bit Arm® Cortex®-M3, 24MHz, 8KB SRAM
On-board sensors (Shipping Currently, Rev 8)
On-board sensors (Shipping Currently, Rev 8)
Accel/Gyro: 3x ICM-45686 (with BalancedGyro™ Technology)
Barometer: ICP20100 & BMP388
Mag: BMM150
On-board sensors (Rev 3/4, discontinued)
Barometer: ICP20100 & BMP388
Mag: BMM150
On-board sensors (Rev 3/4, discontinued)
Accel/Gyro: ICM-20649 or BMI088
Accel/Gyro: ICM-42688-P
Accel/Gyro: ICM-42670-P
Mag: BMM150
Barometer: 2x BMP388
Accel/Gyro: ICM-42688-P
Accel/Gyro: ICM-42670-P
Mag: BMM150
Barometer: 2x BMP388
Electrical data
Voltage Ratings:
Max input voltage: 6V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Current Ratings:
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Current Ratings:
output current limiter: 1.5A
All other port combined output current limiter: 1.5A
All other port combined output current limiter: 1.5A
Interfaces
16- PWM servo outputs
R/C input for Spektrum / DSM
Dedicated R/C input for PPM and S.Bus input
Dedicated analog / PWM RSSI input and S.Bus output
4 general purpose serial ports
R/C input for Spektrum / DSM
Dedicated R/C input for PPM and S.Bus input
Dedicated analog / PWM RSSI input and S.Bus output
4 general purpose serial ports
3 with full flow control
1 with separate 1.5A current limit (Telem1)
1 with I2C and additional GPIO line for external NFC reader
1 with separate 1.5A current limit (Telem1)
1 with I2C and additional GPIO line for external NFC reader
2 GPS ports
1 full GPS plus Safety Switch Port
1 basic GPS port
1 basic GPS port
1 I2C port
1 Ethernet port
Transformerless Applications
100Mbps
100Mbps
1 SPI bus
2 chip select lines
2 data-ready lines
1 SPI SYNC line
1 SPI reset line
2 data-ready lines
1 SPI SYNC line
1 SPI reset line
2 CAN Buses for CAN peripheral
CAN Bus has individual silent controls or ESC RX-MUX control
2 Power input ports with SMBus
1 AD & IO port
2 additional analog input
1 PWM/Capture input
2 Dedicated debug and GPIO lines
2 additional analog input
1 PWM/Capture input
2 Dedicated debug and GPIO lines









Certifications



Company Profile


Packaging & Shipping

FAQ
Frequently Asked Questions
Q1: What is the Minimum Order Quantity(MOQ)?
A1: No quantity limited, Sample order or small order is acceptable, but the customers have to pay the sample cost and the courier
cost.
A1: No quantity limited, Sample order or small order is acceptable, but the customers have to pay the sample cost and the courier
cost.
Q2: What is the lead time?(How long will it take to prepare my goods?)
A2:2-3days for sample orders, 10-15 days for bulk orders.(The exact time will be based on the requirements)
A2:2-3days for sample orders, 10-15 days for bulk orders.(The exact time will be based on the requirements)
Q3: How will you deliver my goods to me?
A3: Normally, we will ship the goods by air, by sea and by express.
A3: Normally, we will ship the goods by air, by sea and by express.
Q4: Can you print my own logo on the products?
A4: Yes, of course. Not only the logo, but also the packing design and other OEM services are available.
A4: Yes, of course. Not only the logo, but also the packing design and other OEM services are available.
Q5: What is your product quality?
A5: Our raw materials are all purchased from qualified suppliers. And we have very strict QC standard to assure our final products meet your requirements.
A5: Our raw materials are all purchased from qualified suppliers. And we have very strict QC standard to assure our final products meet your requirements.
Q6. Do you test all your goods before delivery?
A6: Yes, we have 100% test before delivery.
A6: Yes, we have 100% test before delivery.
Q7:What is your warranty?
A7: Our warranty is 12 months after you received the goods. We will pay high attention to after-sales service.
A7: Our warranty is 12 months after you received the goods. We will pay high attention to after-sales service.
Q8:What can I buy from you?
A8: Our products include agriculture drones,motors,battery,other drones's parts and so on
A8: Our products include agriculture drones,motors,battery,other drones's parts and so on
Send your message to this supplier
People who viewed this also viewed
Find Similar Products By Category
- Supplier Homepage
- Products
- Flight Control
- Holybro Pixhawk 6X Flight Control Kit Pix6X Drone Flight Control
Related Categories
Hot Searches
More